CCTV Installation in Narborough
Professionally installed CCTV for Narborough homes and businesses. Hardwired PoE cameras, local NVR recording, and no monthly subscriptions - designed for the mix of older village properties around the centre, 1960s–1980s housing estates, and riverside homes found across this southwest Leicestershire village and its neighbours.
By the Doberman install team · CCTV system designers & installers, Leicester · Last reviewed February 2026
By the Doberman install team
CCTV system designers & installers, Leicester
Last reviewed February 2026
What you get
Site survey
We visit your Narborough property, walk every approach and boundary, assess lighting and cable routing options, and identify the coverage zones that matter - before recommending anything.
System design
Camera positions, lens types, and recording capacity tailored to your property - whether that’s a period cottage near the village centre, a 1970s semi on one of the housing estates, or a commercial unit at Carlton Park.
Professional installation
Cables routed through lofts, cavities, and existing conduit. No surface‑clipped runs across your front elevation. Clean, permanent work that lasts.
Handover and training
Full walkthrough of live view, playback, app access, and basic troubleshooting so you can actually use the system from day one.
How it works
Survey
We drive from Leicester to Narborough (about 15 minutes via the A426 and B4114) and walk your property thoroughly. A standard residential survey takes around 45 minutes.
Design
Camera positions, lens choices, and NVR specification designed around your layout. You receive a clear written proposal with a fixed price.
Install
Cable routing, camera mounting, NVR setup, network configuration, and night commissioning. Most residential installs complete in a single day.
Residential CCTV in Narborough village
The older properties around Narborough’s village centre - along Church Street, near All Saints’ Church, and in the streets running off Enderby Road - are a mix of Victorian and Edwardian brick-built cottages and interwar semis. These have solid or part-solid walls, relatively shallow loft spaces, and rear gardens that often back onto each other. Cable routing here requires care: where cavity walls are absent or narrow, we run Cat6 through the loft and drop internally, keeping runs hidden behind soffits and within existing roof features. On a typical older village property in Narborough, we’re threading 12-18 metres of cable per camera to keep everything concealed.
The B4114 corridor and the streets immediately adjacent to Narborough railway station have a denser mix of Victorian terraces and 1930s semis. Properties here tend to face onto busier through-routes, which affects camera placement: front cameras need to capture the driveway and entrance without the headlights of passing traffic on the B4114 washing out the image. We position cameras under eaves or fascia overhangs to reduce direct light bleed and adjust IR sensitivity settings during commissioning, which we always do after dark. A standard two to three camera system for a terrace here - front entrance, rear garden, side gate - typically costs £1,100-£1,400 fully installed.
The 1960s to 1980s housing estates further out from the village centre - covering roads off Leicester Road and towards the Littlethorpe boundary - are among the most straightforward property types we install. Cavity walls, accessible lofts, consistent eave heights, and regular plot layouts with a front drive, side access, and enclosed rear garden. A four‑camera system covering these approaches is the most common configuration we install here. Camera placement on these estates also requires attention to close plot spacing - neighbouring driveways are often within the field of view of a standard wide‑angle lens, so we use varifocal lenses where needed to narrow coverage to your own boundary.
River Soar and canal-adjacent properties
A number of properties in and around Narborough sit close to the River Soar or the Grand Union Canal towpath - particularly those along Mill Lane and near the old mill area. These properties face specific security considerations: towpath access means there are approach routes that don’t come from the road, often with no street lighting and significant vegetation. Cameras covering these aspects need strong IR performance and wider lenses to account for the irregular boundary shapes typical of riverside plots.
Moisture is also a practical consideration. Camera housings on properties within 50 metres of water should be rated IP67 or better, and we prefer junction boxes with sealed cable entries on any installation facing a watercourse. All cameras we specify meet at least IP67 as standard, but for riverside installations we pay particular attention to cable entry points and seal them with outdoor-rated mastic rather than relying on the manufacturer’s standard gland alone. We also avoid siting cameras where persistent condensation from the river might affect the lens over time.
If your garden backs onto the Soar or the canal towpath, we typically recommend at least one camera covering that rear boundary with a 30-metre IR range and a wide enough angle to capture the full garden width. On longer riverside plots, a second camera angled to cover the side approach from the towpath direction may be worth considering. We assess this specifically during the survey rather than applying a blanket rule.
Carlton Park and commercial CCTV in Narborough
Carlton Park industrial and business estate, sitting between Narborough and Enderby off Coventry Road, is the main commercial and light-industrial zone in this part of southwest Leicestershire. Units here range from small trade premises and workshops to larger distribution and logistics operations. The security challenges are typical of mixed industrial estates: vehicle access from a small number of entry points, loading bays that are active at varying hours, and perimeter fencing that creates clear camera mounting opportunities if used correctly.
For Carlton Park units, we design perimeter coverage using a combination of varifocal cameras on the fence line and fixed cameras at each vehicle and pedestrian entrance. Number plate capture at the main gate requires a dedicated ANPR-optimised lens - typically a 6mm or 8mm on a camera with a wide dynamic range sensor to handle the contrast between headlights and a dark background. Internal coverage of storage areas, loading bays, and staff entrances uses standard 2.8mm or 4mm cameras at appropriate height. Cable runs across a commercial yard can exceed 70 metres, well within PoE’s 100‑metre limit, but we specify external-grade armoured Cat6 in surface conduit or buried duct for yard crossings. We use 4K cameras where perimeter identification distance is 15 metres or more.
Smaller trade premises and retail units on Carlton Park or along the Narborough Road commercial strip need a different approach: entrance coverage, till or counter areas at closer range, and rear access or delivery doors. We match camera type and lens to each zone rather than fitting identical cameras throughout. A small unit might need only three cameras - entrance, counter, and rear door - where the right lens choices matter more than camera count.
Enderby and Littlethorpe
Enderby sits immediately north of Narborough and shares much of the same housing character - post-war semis, some older properties around the village centre, and newer infill developments. The properties along King Street and near Enderby’s own village centre are older brick-built houses with similar cable routing considerations to Narborough’s period stock. Newer developments on the edges of Enderby have open-plan front gardens and modern construction with accessible loft spaces and full cavity walls, making cable routing relatively clean.
Littlethorpe is a smaller settlement to the south of Narborough, with a mix of detached and semi-detached properties, some backing onto open farmland. Rear-facing cameras on these properties need to account for longer sight lines and the absence of ambient light - we use cameras with 30-metre IR as standard and confirm actual IR performance during night commissioning rather than relying on manufacturer specifications alone. Properties directly adjacent to the Soar meadows at Littlethorpe also have the riverside considerations described above.
We cover both villages as part of our standard Narborough service area. Travel time from Leicester is no different, and we visit Enderby and Littlethorpe properties in the same schedule as Narborough itself. If you’re in either village and wondering whether we cover your address, we do.
Pricing
A typical 3-4 camera residential system starts from around £950 for hardware (cameras, NVR, drives, gateway), with installation on top. Larger properties, commercial premises at Carlton Park, and riverside installs with more complex cable sealing requirements will cost more. We provide a fixed quote after the site survey - no hidden extras.
Why Doberman
Hardwired PoE, not Wi‑Fi
Every camera runs on a dedicated Ethernet cable for power and data. No signal drops through solid Victorian walls, no battery swaps, no Wi‑Fi dependency.
Local recording, no subscriptions
Footage records to your own NVR on‑site. No cloud fees, no monthly costs, no third‑party access to your video data.
Village property experience
Narborough’s older cottages and period semis have solid or narrow-cavity walls and shallow lofts. We know how to route cables cleanly in these properties without surface clipping across front elevations.
Riverside installation know-how
Properties near the Soar or the Grand Union Canal need sealed housings, protected cable entries, and IR cameras specified for zero ambient light. We address this as standard on any riverside install.
About Doberman
Doberman is a Leicester‑based CCTV installation company. We design, install, and support hardwired PoE camera systems for homes and businesses across Leicestershire - including regular work in Narborough, Enderby, Littlethorpe, and the Carlton Park area. We’ve worked on everything from two‑camera cottage installs near the village centre to multi‑camera commercial systems at Carlton Park units. Every installation is carried out by our own team; we don’t subcontract.
We’re based in Leicester, roughly 15 minutes from Narborough via the A426 and B4114. We work in the area regularly and understand the local property types - from the period cottages around the village centre to the post‑war estates off Leicester Road and the riverside properties along the Soar.
If you want to understand our approach before getting in touch, our CCTV blog covers everything from camera placement to system specs to what drives the cost of an installation. For a full overview of our services, visit our Doberman homepage. For a full list of towns and areas we work in, see our areas we cover.
Areas we cover
We cover Narborough village centre, the housing estates off Leicester Road, Littlethorpe, Enderby, Carlton Park, and properties along the River Soar and Grand Union Canal. If you’re not sure whether we cover your location, ask - we almost certainly do.
Frequently asked questions
- Do you cover Narborough?
- Yes. We’re based in Leicester, about 15 minutes away via the A426 and B4114, and work in Narborough and the surrounding area regularly. We cover the village itself plus Enderby, Littlethorpe, and the Carlton Park business estate.
- How many cameras does a typical Narborough home need?
- Most homes need three to four cameras. A standard semi on the 1970s estates needs one covering the front and driveway, one on the rear garden, and one or two on side access. The older cottages near the village centre may need fewer cameras but more careful cable routing through solid walls. We confirm the exact count during the survey.
- How much does CCTV installation cost in Narborough?
- A typical three to four camera residential system starts from around £950 for hardware, with installation on top. Total installed cost for a standard home is usually £1,100-£1,500. Larger properties, commercial premises, and installs with complex cable routing cost more. We provide a fixed written quote after the site survey.
- Do I need to pay a monthly subscription?
- No. Footage records locally to an NVR at your property. There’s no cloud storage and no subscription. You own the hardware and the recordings. App access for remote viewing uses your existing broadband and is free.
- My property backs onto the River Soar or the canal towpath. Does that affect installation?
- Yes, and it’s worth discussing during the survey. Towpath access means cameras need to cover approaches with no street lighting and often dense vegetation. We use cameras with at least 30-metre IR range and IP67 housings as standard, and we pay extra attention to sealing cable entry points on any riverside installation. We also plan camera angles to cover the rear boundary properly, which on a riverside plot may mean a second camera to handle the full width.
- How long does the installation take?
- A typical three to four camera residential install takes a single day - usually arriving around 8:30am and finishing by 4-5pm, including cable routing, camera mounting, NVR setup, app configuration, and returning after dark for night commissioning. Larger installs or properties with complex cable routing to outbuildings may take a second day.