CCTV Installation in Shepshed
Professionally installed CCTV for Shepshed homes and businesses. Hardwired PoE cameras, local NVR recording, and no monthly subscriptions - designed for the mix of framework knitters’ cottages, Victorian terraces, post‑war council estates, and newer developments found across this large northwest Leicestershire town.
By the Doberman install team · CCTV system designers & installers, Leicester · Last reviewed March 2026
By the Doberman install team
CCTV system designers & installers, Leicester
Last reviewed March 2026
What you get
Site survey
We visit your Shepshed property, walk every approach and boundary, assess lighting and cable routing options, and identify the coverage zones that matter - before recommending anything.
System design
Camera positions, lens types, and recording capacity tailored to your property - whether that’s a knitters’ cottage off Charnwood Road, a Victorian terrace on Brook Street, or a new‑build on one of the estates off the A512.
Professional installation
Cables routed through lofts, cavities, and existing conduit. No surface‑clipped runs across your front elevation. Clean, permanent work that lasts.
Handover and training
Full walkthrough of live view, playback, app access, and basic troubleshooting so you can actually use the system from day one.
How it works
Survey
We drive from Leicester to Shepshed (about 25-30 minutes via the M1 and A512) and walk your property thoroughly. A standard residential survey takes around 45 minutes.
Design
Camera positions, lens choices, and NVR specification designed around your layout. You receive a clear written proposal with a fixed price.
Install
Cable routing, camera mounting, NVR setup, network configuration, and night commissioning. Most residential installs complete in a single day.
Residential CCTV in Shepshed
Shepshed has a population of around 13,000, making it one of the larger towns in Leicestershire, and its housing stock reflects centuries of growth. The oldest properties in the town centre - along Charnwood Road, Hall Croft, and the streets near the Bull Ring - include framework knitters’ cottages with distinctive wide upper‑floor windows designed to let light in for loom work. These are compact stone or brick buildings with thick walls, low eaves, and shallow loft spaces. Cable routing requires careful planning: solid walls rule out cavity runs, so we thread Cat6 through the loft where there’s enough clearance and drop down internally. Camera mounting positions need to respect the character of these older buildings - we use discreet turret cameras under eaves rather than bulky housings that dominate a period frontage.
The Victorian and Edwardian terraces along Brook Street, Field Street, and Iveshead Road are more typical installation territory. These have standard cavity walls, accessible lofts, and regular soffit lines for camera mounting. A three to four camera system handles these properties well: one covering the front entrance (usually a 4mm lens for identification at 6-10 metres), one on the rear garden with a wider 2.8mm lens, and one or two covering side access or rear alleyways. A four‑camera system like this typically costs £1,200-£1,500 fully installed. The rear alleys behind terraced rows are common approach routes and often the first place we recommend a camera.
The post‑war council estates - around the Tickow Lane area, Ingleberry Road, and parts of Anson Road - are the most straightforward installs in Shepshed. Regular semi‑detached layouts with front driveways, side gates, and rear gardens. Cavity walls are generous, loft spaces are accessible, and soffit heights are consistent for mounting. Three cameras covering front, side, and rear is the standard configuration here.
Newer developments on the edges of Shepshed - off the A512 towards Loughborough, and the recent builds to the south and east of the town - have open‑plan front gardens, integrated garages, and tighter plot spacing. Front cameras need to handle close‑range wide angles, and the proximity of neighbouring properties means careful camera placement to avoid capturing areas beyond your boundary. We use varifocal lenses where needed and compact turret cameras that sit discreetly under modern fascia boards.
Shepshed’s industrial heritage and mixed property types
Shepshed’s history in the hosiery and knitwear trade shaped the town physically. The former factory buildings and workshops along Britannia Street and the streets off Charnwood Road have been converted to various uses - some residential, some commercial, some mixed. Installing CCTV in converted industrial buildings means dealing with unusually high ceilings, large window openings, and exposed brickwork. Camera mounting heights need to account for these proportions: too high and you lose facial detail, too low and coverage angles are restricted. We match lens selection to the actual distances involved rather than defaulting to a standard setup.
The mix of old and new in Shepshed also means varied boundary types. Older properties have brick walls, stone walls, and hedgerows. Newer estates have close‑board fencing at 1.8 metres. Each affects camera placement and coverage differently. During the survey, we map every boundary and approach route so the system design accounts for what’s actually there - not what a typical property might look like. This matters because Shepshed has enough variety within a few streets that two neighbouring properties can need completely different camera layouts.
Business and commercial CCTV in Shepshed
Shepshed has a working town centre along Charnwood Road and Field Street with independent shops, takeaways, pubs, and service businesses. Retail CCTV needs to cover entrances, till areas, stock rooms, and rear access - each at different distances and lighting conditions. We match camera types to each zone: a wide‑angle 2.8mm lens for the shop floor, a tighter 4mm or 6mm lens on the till for facial detail, and a dedicated camera on the rear delivery entrance where stock leaves the building.
The industrial and commercial units around the edges of Shepshed - along the A512 corridor and towards Loughborough - need perimeter coverage, loading bay monitoring, and often number plate capture at vehicle entrances. These are larger installs with cable runs that can exceed 50-60 metres across a yard, but still well within PoE’s 100‑metre limit. We use external‑grade conduit and proper burial planning for any runs crossing open ground. For perimeter scenarios where you need to identify detail at 20 metres or more, we specify 4K cameras with appropriate lenses and IK10‑rated vandal‑resistant housings where cameras are within reach.
Why hardwired PoE cameras
Every camera we install uses Power over Ethernet - one Cat6 cable carries both power and video. Wi‑Fi cameras depend on signal strength that degrades through walls and over distance. In a framework knitters’ cottage with thick stone walls, a rear‑mounted Wi‑Fi camera might be two or three solid walls from the router - that’s an unreliable connection before anyone even starts streaming in the evening. PoE cameras run on a dedicated network between camera and NVR, completely independent of your broadband.
Local NVR recording means footage stays on‑site. No cloud uploads, no subscriptions, no third‑party access to your video data. You own the hardware and the recordings. For a detailed breakdown of how this affects cost and system design, see our home CCTV page.
Pricing
A typical 3-4 camera residential system starts from around £950 for hardware (cameras, NVR, drives, gateway), with installation on top. Larger properties, commercial premises, and older buildings with more involved cable routing will cost more. We provide a fixed quote after the site survey - no hidden extras.
Why Doberman
Hardwired PoE, not Wi‑Fi
Every camera runs on a dedicated Ethernet cable for power and data. No signal drops through thick cottage walls, no battery swaps, no Wi‑Fi dependency.
Local recording, no subscriptions
Footage records to your own NVR on‑site. No cloud fees, no monthly costs, no third‑party access to your video data.
Period property experience
Shepshed’s framework knitters’ cottages and older terraces have solid walls, shallow lofts, and character features. We know how to route cables and mount cameras without damaging period brickwork or stonework.
Night commissioning as standard
We don’t leave until every camera performs after dark. IR coverage, streetlight glare, and headlight flare are tested and adjusted on‑site - not left for you to discover later.
About Doberman
Doberman is a Leicester‑based CCTV installation company. We design, install, and support hardwired PoE camera systems for homes and businesses across Leicestershire - including work in Shepshed and the neighbouring Loughborough area. We’ve installed systems across a range of Shepshed properties, from compact cottages in the town centre to newer builds on the edges. Every installation is carried out by our own team; we don’t subcontract.
We’re based in Leicester, roughly 25-30 minutes from Shepshed via the M1 and A512. We work in northwest Leicestershire regularly and understand the local property types - from the knitters’ cottages around Charnwood Road to the post‑war estates off Tickow Lane and the growing new‑build developments on the edges of town.
If you want to understand our approach before getting in touch, our CCTV blog covers everything from camera placement to system specs to what drives the cost of an installation. For a full overview of our services, visit our Doberman homepage. For a full list of towns and areas we work in, see our areas we cover.
Areas we cover
We cover Shepshed town centre and all surrounding areas. Shepshed sits just northwest of Loughborough, and we also cover nearby Hathern, Belton, Long Whatton, Diseworth, and the villages along the A512 corridor. If you’re not sure whether we cover your location, ask - we almost certainly do.
Frequently asked questions
- Do you cover Shepshed?
- Yes. We’re based in Leicester, about 25-30 minutes away via the M1 and A512, and work in the Shepshed and Loughborough area regularly. We cover the town itself plus surrounding villages including Hathern, Belton, Long Whatton, and Diseworth.
- How many cameras does a typical Shepshed home need?
- Most homes need three to four cameras. A standard semi on the post‑war estates typically needs one covering the front and driveway, one on the rear garden, and one or two on side access points. The older cottages and terraces in the town centre may need fewer cameras but more careful positioning due to compact layouts and shared boundaries. We confirm the exact count during the survey.
- How much does CCTV installation cost in Shepshed?
- A typical three to four camera residential system starts from around £950 for hardware, with installation on top. Total installed cost for a standard home is usually £1,200-£1,500. Older properties with solid walls and more involved cable routing may be towards the higher end. We provide a fixed written quote after the site survey.
- Do I need to pay a monthly subscription?
- No. Footage records locally to an NVR at your property. There’s no cloud storage and no subscription. You own the hardware and the recordings. App access for remote viewing uses your existing broadband and is free.
- How long does the installation take?
- A typical three to four camera residential install takes a single day - usually arriving around 8:30am and finishing by 4-5pm, including cable routing, camera mounting, NVR setup, app configuration, and returning after dark for night commissioning. Older properties with solid walls may add an hour or two for more careful cable routing.
- My cottage has thick stone walls. Is that a problem for installation?
- Not at all - we install in older Shepshed properties regularly. Solid stone or brick walls mean we can’t use cavity runs, so we route Cat6 cable through the loft space and drop down internally. Camera fixings go into the masonry with appropriate anchors. The key is planning the cable route carefully during the survey, which is why we spend time in the loft before recommending anything.