Doberman

CCTV for shopsset up to identify the face at the door

Most shop cameras record something. Far fewer record a face the police can use. Here is where each camera goes, how close the door camera has to be, how to light it, what the law asks of a business and where UniFi Protect fits.

The quick answer

Shop CCTV earns its keep when it can identify a face rather than show a figure. Home Office guidance sets the minimum: one camera at the main door that identifies everyone who walks in, and, strongly recommended, a second at the till that can do the same, both recording at six frames a second or more. Everything else (aisles, high-value shelves, the stockroom, the back door) only needs to recognise people or follow what they did. Add signs, an ICO registration and a plan for handing footage to the police, and the system is ready for the day you need it.

What this page covers

  • The five views a shop needs, and what standard each one has to meet.
  • How close the door camera must be to identify a face, worked out for real cameras.
  • Lighting at a glass shopfront, and the public-view monitor by the door.
  • How long to keep footage, and how to hand it to the police so they can use it.
  • Signs, the ICO fee, staff privacy and the rules on facial recognition.
  • Where UniFi Protect fits: detection, search, evidence export and every branch in one app.

The five views every shop needs

Each camera gets one job. The standard column is what the footage has to be good enough to do.

Main door, facing in

What it must show
The face of everyone who walks in, plus clothing and what they carry
Standard
Identify
Frame rate
6 fps minimum (12 fps in some police guidance)
Common mistake
Mounted too high, or looking at bright glass

Till and counter

What it must show
The face of the person at the counter, and their hands
Standard
Identify
Frame rate
6 fps minimum
Common mistake
Looking down on the top of heads

High-value shelves

What it must show
Who stood there and what they picked up
Standard
Recognise or observe
Frame rate
6 fps at higher-risk spots
Common mistake
One wide camera trying to cover the whole floor

Stockroom and back door

What it must show
Who went in and out, and when
Standard
Recognise or observe
Frame rate
2 to 6 fps
Common mistake
Left out because customers never go there

Public-view monitor

What it must show
The door camera only, shown to people as they enter
Standard
Shows the door view
Frame rate
Not a recording
Common mistake
Showing the till or every camera

Standards and frame rates from the Home Office small-business CCTV guidance; the 12 fps figure and the public-view monitor rule are from Avon and Somerset police guidance for licensed premises.

By the Doberman install team

UniFi CCTV designers & installers, England

Last reviewed November 2026

Why so much shop CCTV fails on the day

Most shop CCTV records something. The trouble starts when you play it back for the police and the person who took the stock is a grey shape at the far end of the frame. The Home Office puts it plainly in its guidance for small businesses: one of the most common failings is having image sizes too small to identify or recognise anyone.

That guidance uses three standards, and they are the language the police use too:

  • Identify. A person fills the height of the screen, with enough detail to identify them beyond reasonable doubt. This is what the door and till cameras must do.
  • Recognise. A person fills half the screen. Someone who knows them can say with a high degree of certainty that it is the same person they have seen before.
  • Observe. A person fills a quarter of the screen. You can make out things like distinctive clothing and follow what happened.

The same guidance warns against using one camera for two jobs. A camera set up to watch for the delivery van will not identify the person who walks off with a crate, and, in its words, you and the police are likely to be disappointed. So the plan is one camera, one job, and each job has a standard.

Police guidance on CCTV adds a test worth doing before you rely on anything: judge the system on recorded footage, not the live screen, and do not expect digital zoom to add detail that was never captured. If you cannot see it in the recording, it is not fit for purpose. How many cameras a typical shop ends up with is worked through in how many CCTV cameras a small shop needs, so this page sticks to where they go and how they are set up.

The door camera: a face for everyone who walks in

This is the camera that matters most. The Home Office minimum is at least one camera giving identifiable images of everyone entering: a clear face, plus clothing and anything they are carrying. It says the best place is usually the main doorway. Everyone who steals, threatens staff or comes back for a second go walks through it, and it is the one spot where they face the camera.

Police guidance turns the identify standard into a number you can design to. Avon and Somerset Police, in guidance written for licensed premises that also covers shops and supermarkets at the door, set it at 250 pixels per metre, or 4 mm of scene per pixel. Recognise is 125 pixels per metre and observe is 62.5.

Pixels per metre is what decides it, and it depends on two things: how many pixels the camera has across, and how wide the scene is where the person stands. A wide-angle lens takes in more of the shop, which spreads the same pixels thinner. That is why a 4K camera on the wrong lens, in the wrong spot, still gives you a figure instead of a face.

1080p camera (any make)

Pixels
1,920 across
Identify (250 px per metre)
Scene no wider than 7.7 m
Recognise (125 px per metre)
Scene no wider than 15.4 m

UniFi G5 Turret Ultra (4MP, 102.4 degree lens)

Pixels
2,688 across
Identify (250 px per metre)
About 4.3 m from the camera
Recognise (125 px per metre)
About 8.6 m from the camera

UniFi G6 Turret (4K, 109.9 degree lens)

Pixels
3,840 across
Identify (250 px per metre)
About 5.4 m from the camera
Recognise (125 px per metre)
About 10.8 m from the camera

Our arithmetic from the police pixel densities and Ubiquiti's published resolution and lens angle for each camera. It holds near the centre of the picture, in good light. Lens distortion, compression and backlight all shorten it, so treat these as the most you will get.

Put that in a real doorway. The 4K G6 Turret identifies out to about five metres. Mounted inside, facing the door from a few metres away, it covers the whole opening and catches every face full on. Put the same camera in a corner at the back of the shop and it records everyone at the door at well under the identify standard.

A few rules that come straight from the guidance:

  • Mount it inside, facing in. The police guidance says door cameras should be mounted internally where practicable, and give clear, unobstructed images of everyone coming in and going out.
  • Not too high. "Camera set too high" is the first bad example in the Home Office leaflet. A camera looking straight down records the top of a cap. Lower and further back sees under the peak.
  • Record it at a proper frame rate. At least six frames a second for the door and till cameras, says the Home Office; the Avon and Somerset guidance asks for 12 at entrance doors. Someone walking briskly is only in the identify zone for a moment.

Want the door camera placed for faces, not figures?

Tell us the shop layout and where the door is. We will work out which camera, which lens and which spot gives you an identifiable face of everyone who walks in.

The till, where staff abuse usually happens

The till is the second identify camera. The Home Office strongly recommends one near the till with the same capability as the door camera, and its location table rates tills at identify for robbery, assault, theft and fraud. Cash counting gets the same rating.

It is also where most arguments with staff start: refused sales, age checks, someone told they cannot take the goods without paying. The BRC's 2026 crime report put violence and abuse against shopworkers at 1,600 incidents a day, down from 2,000 the year before but far above the 455 a day recorded in 2019-20. Footage that shows the face, what happened at the counter and the time is what turns a report into a case.

Scotland already has a specific offence, and England and Wales has now legislated for one. In Scotland, section 1 of the Protection of Workers (Retail and Age-restricted Goods and Services) (Scotland) Act 2021 makes it an offence to assault, threaten or abuse a retail worker at work, with up to 12 months in prison, a fine or both. In England and Wales, the Crime and Policing Act 2026, which received Royal Assent on 29 April 2026, introduces a specific offence of assaulting a retail worker. What happens when you catch someone in the act, and what you may do, is in what a shop can do if it catches a shoplifter.

Set the till camera so it sees the customer's face across the counter, not the top of the cashier's head. Behind and slightly above the staff side, looking out, usually does it. On UniFi, an Enhanced Bitrate Zone tells the camera to spend more of its picture quality on one area. Ubiquiti says it is often used for entry points and registers, which is exactly this.

Aisles, high-value shelves, the stockroom and back door

Once the door has a face for everyone, the cameras inside only need to show what each person did. The Home Office table rates high-value items, the stockroom and the loading bay at recognise or observe, and general aisles at observe. That is the point of getting the door right: a clear face at the entrance plus a wider shot of the same jacket at the spirits shelf is enough to tie one to the other.

  • High-value shelves. Point a camera along the shelf, not across the shop, so it sees hands and pockets. Start with whatever your own stock losses say goes missing most.
  • Blind spots. Walk the floor and look for the corner behind the tall unit. That is where stock disappears.
  • Stockroom and back door. Customers never go there, which is exactly why it gets left out. Deliveries, staff exits and out-of-hours break-ins all happen here. Recognise is enough, and two to six frames a second will do.
  • Never toilets or changing rooms. The ICO says monitoring should target areas of particular risk and that covert cameras should not go where people would expect privacy, such as toilets and changing rooms. If a camera has to look near a fitting room door, a privacy zone blacks out the part of the picture you should not record.

Indoors, we would normally fit a turret or dome. Outside, over the shopfront or the yard, a camera needs to cope with weather and darkness. Our guide to types of CCTV camera covers which goes where.

Lighting at the door and the glass shopfront problem

A camera inside a shop looking at the door is looking at the brightest thing in the room. On a sunny afternoon the street behind a customer is far brighter than their face, so the camera exposes for the window and the face goes dark. "Subject strongly backlit" is one of the four bad examples in the Home Office leaflet.

Three things fix it:

  • A camera that handles contrast. The Avon and Somerset guidance asks for wide dynamic range working 24 hours a day at all light levels, and for backlight compensation. Check both are switched on in the settings as well as listed on the box.
  • Light on the face. The Home Office says additional lighting may be needed for good images. A light inside the entrance, falling on people as they come in, does more than a better camera.
  • Angle. Moving the camera a little to one side, so it is not staring straight into the glass, often helps as much as either.

After closing, the light changes again. Our guide to security lighting and CCTV covers night-time light, and can CCTV cameras see through glass explains what happens when a camera looks out through a window.

The public-view monitor at the door

A screen by the entrance showing people their own face as they walk in tells them, in a way no sign does, that the cameras are real and recording. The Home Office leaflet makes the same point about deterrence in general: it relies on people knowing the cameras are there and that they work. Whether CCTV actually stops theft is covered honestly in does CCTV stop shoplifting.

Police guidance for licensed premises calls this a comfort monitor and sets one firm rule: it should show the camera covering the doorway, and must not show any other camera in the premises. The ICO says much the same about live footage in general. Viewing should be restricted to the operator and other authorised people. So the screen at the door shows the door camera, and the till, stockroom and office views live on a screen only staff can see.

On UniFi, the Protect Viewport is the box for this. Ubiquiti describes it as a hub for viewing Protect camera feeds on an HDMI display, and it runs off a single network cable. Plug it into a screen by the door and set it to the door camera alone.

Recording, retention and how long to keep footage

No law sets a fixed period for a shop. The ICO says to keep footage for the shortest period your purpose needs, and that a recorder able to store six months is not a reason to keep six months. On the other side, police guidance notes that keeping more than 31 days can be useful, and GOV.UK tells the public that most footage is deleted 30 days after it is recorded. For most shops we would set about a month, because a theft may only be noticed at a stock check.

The trap is cutting quality to fit more days on the drive. Police guidance says video quality should not be reduced to fit the storage. Size the drive for the cameras, the quality and the days instead. The CCTV storage calculator does the sum, and how long businesses keep CCTV footage sets out where the 31 days comes from.

Keep the recorder itself out of reach: in a locked office or cupboard, not under the counter where someone can pull it. A recorder that walks out of the door takes the evidence with it. What is an NVR covers where it should live and how to keep it running through a power cut.

Getting footage the police will use

The BRC's 2026 report found around half of retailers now report a positive police response, and asks shops to report every incident. Footage the police can use straight away makes that response far more likely. Police guidance is clear on what they need:

  • The recorder's own format. Export in the native file format at the same quality it was stored, with no extra compression, and include any software needed to play it.
  • The right time. The clock should be set correctly and kept right through GMT and BST, and the time and date must be legible on the footage.
  • No phone videos of the screen. Police guidance calls filming the screen poor practice, to be used only as a last resort.

UniFi Protect has a tool built for this. In Case Manager you add clips from playback or from a search, trim them, add a note to each and close the case, which locks it against changes. Downloading it gives a zip of the clips and a PDF timeline with your notes, which Ubiquiti describes as evidence for the police or an insurance claim. Clips in a case are kept beyond the recorder's normal retention, so they are not overwritten while you wait. The full steps, for any system, are in how to export CCTV footage for the police.

Sharing stills of a suspected thief in the window, in a WhatsApp group or online is a different question with its own risks. We cover it in can shops share photos of shoplifters.

Signs, the ICO fee and your duties as a business

A shop camera films the public, so UK GDPR applies from the first day. The ICO's advice for small organisations using CCTV comes down to a short list:

  • Put up signs. They should say who runs the system, what it is for and how to contact you, and sit before people walk into the camera view, with more inside. The ICO's own example wording is "Images are being monitored and recorded for the purposes of crime prevention and public safety."
  • Register and pay the fee. The ICO says you must register and pay the data protection fee, which for most small and medium businesses is either £52 or £78 a year.
  • Update your privacy notice to say you use CCTV and why.
  • Do a DPIA if the risk is high. That is a written risk review called a data protection impact assessment. The ICO says you need one if your CCTV is likely to result in a high risk to people, and its guidance on monitoring staff says facial recognition always needs one.
  • Keep footage only as long as you need it, and limit who can view it.
  • Answer requests. People can ask for copies of footage of themselves, so you need a way to find and share it. Our guide on requesting CCTV footage shows it from their side.
  • Leave audio off. The ICO says audio recording should be switched off by default, and if you do record sound you must make that clear to people.

Staff. The same cameras film the people who work for you. The ICO says that if you use CCTV to monitor staff you need to make it clear to them, and that monitoring or disciplining staff without warning will not usually be fair. Tell them where the cameras are and what they are for, in writing. Covert cameras are for exceptional cases only, such as a suspected theft that telling people would tip off. The detail is in CCTV in the workplace, and the wider rules, including planning, are in UK CCTV regulations. The ICO marks its CCTV guidance as under review following the Data (Use and Access) Act, so check it for changes.

Facial recognition in a shop: what the law asks

Newer UniFi cameras, like many others, can match faces. That is a different thing, legally, from recording a face. The ICO says biometric data used to identify people uniquely, for example with facial recognition, is special category data. You need a lawful basis and a separate condition before processing it.

For a shop, consent is unlikely to work: the ICO says explicit consent is highly unlikely to be appropriate for systematic monitoring of public spaces. The route the ICO describes is the substantial public interest condition for preventing or detecting unlawful acts. To use it you have to show the processing is necessary, that asking for consent would defeat the purpose, and have an appropriate policy document in place when you start. The ICO's guidance on monitoring staff says you must carry out a DPIA before using facial recognition, because it is high risk, and its CCTV guidance asks for procedures to keep the matches accurate.

So the honest position is that facial recognition is a decision you make with a DPIA and policy in hand, not a setting you switch on because the camera offers it. Until you have done that work, leave it off and let the door camera do its normal job of recording faces for a person to look at. Our guide to facial recognition CCTV goes through the decision step by step.

Where UniFi Protect fits in a shop

We install Ubiquiti UniFi, and these are the parts of it that earn their place in a shop, taken from Ubiquiti's own documentation:

  • Detection on the camera. G4, G5, G6 and AI series cameras detect people and vehicles themselves, and Ubiquiti says the processing takes place entirely on the premises, so video is not sent to the cloud to be analysed.
  • Searching footage. The Find Anything tab searches recordings by object type, licence plate, keyword or sound. Add Ubiquiti's AI Key and you can search in plain words, which Ubiquiti says works best for describing people or vehicles. It also says the AI models can occasionally get things wrong, so a person still checks the result.
  • After-hours alerts. Alarm Manager can send a push or email alert when a person is detected, limited to a schedule. A person in the stockroom after you lock up is worth a phone alert; the same person at 2pm is not.
  • Zones. Enhanced Bitrate Zones put more picture quality on the door or till. Privacy Zones black out areas you should not record. Exclusion Zones stop false alerts from screens and reflections.
  • Face and plate recognition. Built into G6 and AI series cameras (not the 360 models), and added to G4 and G5 cameras with an AI Port or AI Key. See the section above before turning it on.
  • Evidence export. Case Manager bundles clips and a PDF timeline, as above. Single clips export from the app or a browser.
  • Every branch in one place. Ubiquiti's Site Manager shows every site you own or manage in one dashboard, and each site can still be reached locally if its internet drops.
  • No licence fee. Ubiquiti's UK page says: "Run 4 or 4,000 cameras - licensing is still $0." Footage records to the recorder in the shop. If you want an off-site copy, Ubiquiti's optional UniFi Cloud Storage is $5 per terabyte a month, or you can archive to Google Drive, OneDrive, Dropbox or your own NAS.

For how the app and recorder work day to day, see UniFi Protect explained. For what a full install involves, see CCTV installation cost. If the shop has a car park or a yard, our guide to ANPR cameras covers number plates, and business CCTV covers premises beyond the shop floor.

Want a UniFi system planned around your shop floor?

Tell us the size of the shop, where the door, till and stockroom are, and how many branches you run. We will design the cameras, recorder and alerts around them.

What CCTV will and won't do about shoplifting

Cameras do not stop a determined thief on their own. What a well-set-up system does is give you a face at the door, a record of what happened at the shelf and footage the police can act on, quickly enough that reporting is worth the effort. Combined with staff who are told when someone is in the stockroom and a door screen that shows people they are on camera, it changes the odds.

The scale of the problem, and what the figures say about who steals and when, is in shoplifting in the UK. If you are tempted to save money with dummy cameras, read do fake CCTV cameras work first: a dummy can never give you the face.

About this page

Where this comes from

Setting up shop CCTV means turning police and Home Office standards into camera positions, then checking the result against data protection law. Published 8 November 2026.

Sources

The identify, recognise and observe standards, the door and till minimum and the frame rates are from the Home Office's CCTV supporting small businesses (CAST 37/10). Pixel densities, the door rule for shops, lighting and the comfort monitor are from Avon and Somerset Police's operational requirement guidance for licensed premises (amended July 2018). Recording and export rules are from GOV.UK's police requirements for CCTV systems and recovery and acquisition of video evidence. Data protection duties are from the ICO's CCTV for your organisation, video surveillance and biometric data guidance. Staff abuse figures are from the BRC Crime Report 2026; the Scottish offence is section 1 of the 2021 Act and the England and Wales offence is from GOV.UK's Crime and Policing Act 2026 page. UniFi features are from Ubiquiti's help articles on AI detections, camera zones, Case Manager, Alarm Manager and Site Manager, and camera specs from the G6 Turret and G5 Turret Ultra tech specs.

What we have deliberately not said

The pixel densities and the 31 days are police guidance, not law for shops. The working distances are our own arithmetic and assume good light near the centre of the picture. We have not given a figure for how much CCTV cuts theft, because we have not found a UK source that measures it for shops. We have given no hardware or installation prices, because they depend on the shop.

Common questions

What is the best CCTV for a shop?

A wired system with a recorder in the shop, a camera at the door that can identify every face coming in, a second one at the till that can do the same, and wider cameras on the aisles, stockroom and back door. Home Office guidance for small businesses sets the door camera as the minimum and strongly recommends a second at the till. The brand matters less than whether each camera is placed and set for the job it has to do. We install Ubiquiti UniFi, which records locally with no licence fee and runs person and vehicle detection on the camera.

Where should CCTV cameras be placed in a shop?

At the main door, facing inwards so it sees faces as people walk in, and at the till, both close enough to identify someone. Then over high-value shelves, the stockroom, the back door and any loading area, where recognising someone or following what they did is enough. Never in toilets or changing rooms. For how many cameras that adds up to, see our page on how many CCTV cameras a small shop needs.

What resolution do I need to identify a face on shop CCTV?

Resolution alone does not decide it. Police guidance asks for 250 pixels per metre across the scene to identify someone, which is 4 mm of scene per pixel. A 4K camera has 3,840 pixels across, so the scene where the face is can be at most about 15 metres wide. With a wide-angle lens that happens close in: about 5.4 metres from a 4K UniFi G6 Turret and about 4.3 metres from a 4MP G5 Turret Ultra. Further back, you see a figure, not a face.

Do shops have to display CCTV signs?

Yes. The ICO says a business needs to put up signs to let people know it is filming them. The sign should say who runs the system, what it is for and how to get in touch, and it should sit before people walk into the camera view, usually on or beside the door, with more signs inside. A website notice on its own is not enough.

Does a shop need to register with the ICO for CCTV?

Usually, yes. The ICO advice for small organisations using CCTV says you must register and pay the data protection fee, which for most small and medium businesses is either £52 or £78 a year. You should also update your privacy notice to say you use CCTV, keep footage only as long as you need it and be ready for people asking for copies of footage of themselves.

How long should a shop keep CCTV footage?

There is no set legal period. The ICO says to keep it for the shortest period your purpose needs, and not to keep it for months just because the recorder allows it. Police guidance notes that keeping more than 31 days can be useful but should not cost picture quality, and GOV.UK says most footage is deleted 30 days after recording. A month is a sensible default for most shops, with any clip linked to an incident locked straight away.

Can shops use facial recognition CCTV?

Only with care. Using faces to identify people uniquely is biometric data, which UK GDPR treats as special category data, so a shop needs a lawful basis and a separate condition before switching it on. The ICO says explicit consent is highly unlikely to work for monitoring a public space, so a shop would usually need the condition for preventing or detecting unlawful acts, with an appropriate policy document and a DPIA in place first. Many UniFi cameras can do face recognition; turning it on is a legal decision first.

Can I put a CCTV screen at the shop door?

Yes, and police guidance for licensed premises suggests one: a monitor near the public door showing only the camera that films people as they walk in, so they can see they are being recorded. It must not show any other camera. Keep every other live view on a screen only staff can see, which is what the ICO asks for.

Will the police use my shop CCTV footage?

They can, if it shows the face clearly and you hand it over properly. Export it in the recorder's own format at full quality, with the player software if it needs one, and check the recorder clock is right. Do not film the screen with your phone: police guidance calls that poor practice and a last resort. Our guide to exporting CCTV footage for the police covers the steps.

Can I watch my shop cameras from home or check more than one shop?

With UniFi, yes. The UniFi Protect app shows live and recorded footage on your phone, and Ubiquiti's Site Manager puts every site you own or manage in one dashboard, so a second or third branch sits next to the first. There is no licence fee for the cameras, and footage stays on the recorder in each shop.

Ready for shop CCTV that gives you the face at the door?

Answer a few quick questions and we will quote from your answers. If anything needs a look in person, we arrange a survey first.