Published UK pricing pages put most home CCTV installations at under a day. Fantastic Services says a typical four-camera wired system takes half a day to a full day, depending on cable runs and camera positions, and MyJobQuote says a single camera can be installed in under an hour. Larger systems, long cable runs and awkward access take longer.
What the published timings say
MyJobQuote's cost page, last updated in September 2026, says "most security camera installations take less than a day" and that "a multi-camera system will take anywhere from a few hours to a full day." Its point is that the time "will depend heavily on the system that you choose."
Fantastic Services gives the same shape from the other end: a single smart camera in under an hour, a four-camera wired system in half a day to a full day. Wireless smart cameras, it says, "fit fastest with no cabling", while wired systems recording to an NVR take longer "because cable is routed through walls and lofts". So a quoted time only means something once you know how many cameras there are and how the cable gets to each one.
What makes a CCTV install take longer
Almost all of the extra time is in the cabling, not the cameras. Fantastic Services puts it plainly: "Long cable runs, solid walls, loft access and multi-storey properties all add installation hours." A camera above a garage with an open loft behind it is a short job. A camera on the far gable of a three-storey house, with the recorder in a ground-floor cupboard, is a long one.
The other things that stretch the day:
- Number of cameras. "Each camera adds hardware and installation time," as Fantastic Services says. Work out how many you actually need before you compare quotes; our page on how many cameras a 3-bedroom house needs walks through it.
- Height and access. "Cameras mounted high or in awkward positions may need access equipment." MyJobQuote prices difficult access, high walls where scaffolding is needed, as an extra charged by the day.
- Wall type. MyJobQuote lists listed buildings and stone walls as adding 20 to 30% to a standard installation. Solid walls take longer to drill and give the cable nowhere to hide.
- Wired or wireless. Wireless is quicker to fit and slower to live with. Our answer on whether wired CCTV is better than wireless covers that trade-off.
The part after the cameras go up
A camera on the wall is not a finished system. MyJobQuote's description of a typical job ends with the recorder being set up, motion zones and recording schedules configured, the remote viewing app set up, and then testing, where "each camera is checked in day and night modes, motion detection is tested, and all recording functions are verified."
Clearway's installation checklist asks for the same: walk-test every camera's view for focus, exposure and coverage, "confirm that recording is functioning and footage is being stored correctly", test remote access, and test image quality "during both day and night conditions." The night check matters because a camera that looks sharp at noon can show glare or a washed-out face under infrared. On a winter afternoon that check can happen before the installer leaves; in midsummer it means someone looking late in the evening. Our answer on whether CCTV works in the dark explains what you should see.
The recorder takes setting up too: how much it stores and for how long. What an NVR is covers the box itself, and the CCTV storage calculator shows how many days of footage a drive holds.
How to get a realistic time for your property
Any installer can give you a far better figure than a national average once they know four things: how many cameras, where the recorder will live, whether there is a loft or void the cable can run through, and what the walls are made of. Ask whether the time they quote includes setting up the app on your phone and checking every camera after dark. If it does not, the job is not finished when the van leaves.